Neje club download driver






















It is recommended to use non-ferrous metals such as alumina. It works well on the surface of strong reflective metal. Make sure the focal length is adjusted to the best before engraving. Fixed flat. We have taken multiple protective measures to ensure the temperature, static electricity will not damage the laser, and provide a one-year warranty.

If you have any questions, you can contact us at time, service nejetool. Table of Contents Download. The limit switch is easily damaged. Please pay attention to the external force when moving. This product supports any point positioning function in g code mode, and can be automatically reset, easy to use and operate about dxf file at NEJE Mode : 1. Matters needing attention Please wear protective glasses before operation. Please do not touch the laser outlet with your hands.

It may burn your hands. Please avoid strongly impact on the machine. More functions will also be updated on this APP, please pay attention! Macbook software has been updated on November 28, There is no need to install driver. If you are a new user or an already installed user, you can ignore this step and download the latest software directly from the Apple store.

You can provide your opinion, and we will put the latest firmware upgrade at the bottom of this page;. NEJE provides lightburn with suitable firmware for this machine and provides a firmware upgrade function.

LightBurn is a paid software. You can download it from the official website of Lightburn. This software is not developed by the NEJE team. You can use it for free for 30 days. As the machine will vibrate during scanning, first find a stable and clean table top to stabilize the four bracket feet; or make a wooden base plate on which fix the four feet.

NEJE software provides automatic low light. If you use laserGRBL and lightburn software to adjust the focus, you need to enter a command: M3 S1; and give a motion command, for example: G0 x10 y10 f; so that low light can be lit;. If it is mainly used for engraving, adjust the focus to a distance of 5mm below the light barrier; then slide the laser through a 5mm spacer to use a fixed focus method;. Step 1: Adjust the bottom of the module and the cut honeycomb panel to a fixed height, refer to the picture above.

Prepare a ruler. Adjust the focus to a fixed height, refer to the picture above. It is recommended to use an object with a fixed thickness and place a gray cardboard on it to assist in adjusting the focus. If it does not meet your expectations, you can use a flat-blade screwdriver to screw the lens to the bottom. This is a standard reference. NEJE software is a simple, safe, high-efficiency engraving software with good image quality.

The scanning mode is very fast. The G code mode is specially processed, and users do not need professional G code knowledge. The following parameters are only for reference. The actual parameters are determined according to the materials and modules used. Updating Neje firmware is not without risks. You can damage the machine if you do it wrong. If you are about to update you must remember simple things:.

Official update website: www. Where to buy Neje. This crap does not work. Why is that? This sucks! It didn't come with a micro chip that was supposed to be included says that on your internet site and it won't connect. I've tried everything and it won't connect. WTF is up with selling people stuff that isn't any good period! Links are working. Try another browser. You need an app. But this can happen only with Android or iOS. For PC you must use cable. I an unable to connect my android or laptop windows 10 to the engraver even though it shows on the bluetooth list.

Any solutions? I am not able to connect bluetooth on either my andriod or laptop even though i can see laser carver listed in the bluetooth list.



0コメント

  • 1000 / 1000